How to upgrade to SLES/SLED 1. SP4. This document (7. SUSE Linux Enterprise Server 1.
Note: If your Linux distribution is not RPM-based, has a custom kernel, or is unsupported, use the steps below to compile VMware Tools, otherwise, see Installing. This is a short step by step to install the vmware tools on SLES 11. Install gcc compiler. yast2 -i gcc. Install kernel headers. yast2 -i kernel-source. Installing with Yum using the MySQL Yum repository. For details, see Section 2.5.1, “Installing MySQL on Linux Using the MySQL Yum Repository”.
SUSE Linux Enterprise Desktop 1. SUSE Linux Enterprise Server 9. SUSE Linux Enterprise Server 8. Novell Linux Desktop 9 A system running one of the product versions listed above should be updated to SLES/SLED 1.
![Installing Edirectory On Sles Installing Edirectory On Sles](http://www.syncer.de/wp-content/uploads/2011/10/103111_1619_GentooLinux1.jpg)
Service Pack 4. Like SLE 1. Service Pack 1 to 3, Service Pack 4 is a full. Don't panic. This document is quite long and detailed, but don't be afraid. In fact. the update procedure is very simple, straight- forward and (in most.
Just pick the method that suits your needs best. Important note: After. This file contains a list of configuration files that could not be. These files must be checked and the.
Updating OES2. Please find information on how to upgrade OES2 systems to SLES 1. SP4 in TID 7. 00.
Availability of SLES1. SP4 for SLES1. 0 SP3 servers running OES2. SP2 or OES2 SP3. Procedure for updating from SLES 8. There is no supported direct upgrade.
SLES8. To update a SLES8 installation, first update to. SLES9. Refer to the SLES9 documentation for details. Procedure for updating from SLES 9.
A supported way to update a SLES 9 system (SLES9 version GA, SP3 and. SP4) is by booting from a SLE 1.
SP4 media. See the respective section. Procedure for updating from NLD 9. A supported scenario to update an NLD 9 system is by updating it to NLD9. SP4 first, followed by updating to SLED 1. SP4 by booting from the SLE. SP4 installation media. This is the only way it has been tested.
Procedure for updating from SLES 1. SLED 1. 0 GA version, SP1, and SP2. There. no supported direct migration path from these SLES/SLED 1. Service Pack 4. You have to perform an update to to the next higher Service Pack by. This means, if you for example whish to.
![Installing Edirectory On Sles Installing Edirectory On Sles](http://www.novell.com/coolsolutions/img/domino7_html_324e5a07.jpg)
![Installing Edirectory On Sles Installing Edirectory On Sles](https://www.suse.com/documentation/sles-12/singlehtml/book_sle_deployment/images/yast2_addon_installed.png)
SUSE® Linux Enterprise Server for SAP Applications is the reference platform for the software development of SAP. It is optimized in various ways for SAP applications.
GA level you have to update to SP1 first. SP2, then to SP3, and then to SP4.
This is the. only way it has been tested. Procedure for updating from SLES 1. Service Pack 3 and SLED 1. Service Pack 3. There are different supported ways for updating a Su. SE Linux. Enterprise 1.
SP3 system to SP4 level. You can either update to SP4 by. SP4 installation media. For installing SP4 via downloading patches, the following tools. Ya. ST Online Update (YOU)2) zen- updater. Alternatively, you can download the full SP4 media (CD or DVD ISO.
SLES/SLED 1. 0 SP4 media. Patch CD update"Update to SP4 via patches. Attention: The update process has to be done completely from. There is no automatic way to revert changes. Furthermore, the server has to be connected online during the.
Prerequisites: You have to make. If you have not done this. Novell Customer Center. Configuration" module in Ya.
![Installing Edirectory On Sles Installing Edirectory On Sles](http://galenslog.typepad.com/galens_log/images/2007/05/30/hurrican_shutters.gif)
Microsoft Windows. For instructions on installing MySQL on Microsoft Windows, using either the MySQL Installer or Zipped binary, see Section 2.3. Installing in Multiple Locations: Unlike vCenter Single Sign-On 5.1, the SSO service included in vSphere 5.5 synchronizes authentication data across locations. Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3.
How to upgrade to SLES/SLED 10 SP4. This document (7008357) is provided subject to the. Installing FreeIPA With Replication. Do you need a single point to add users within your organization for authenticating to multiple backends like your Linux servers?
ST or use the suse_register commandline. This will add an update source to your system.
If your system is. Update by using Ya.
This guide is intended for use by professional network and system administrators during the operation of SUSE® Linux Enterprise. As such, it is solely concerned with.
![Installing Edirectory On Sles 11 Installing Edirectory On Sles 11](http://www.pcc-services.com/sles/backuppc/SLES_Install_Screen_thumbnail.png)
ST Online Update. Start the Online- Update module (YOU) from the Ya. ST control center. Press 'Accept' to apply updates with 'package management' flag. This will install a libzypp maintenance stack update (Patch slesp. After installing it, YOU will restart itself.
Press 'Accept' to apply all available updates that are available. SP3. This may also. Start the Online- Update module from the Ya. ST control center again. Select the optional "Update to SUSE Linux Enterprise. Server/Desktop Service Pack 3" ('move- to- sles.
Do not select any other patch at the. If an add- on product (e. SDK) is installed, the.
The. migration of the add- on product should be done at the same time as the. After the patch is installed, YOU will close.
Start the Online- Update module from the Ya. ST control center again.
The patches 'slesp. Apply these patches to bring the system.
SP4 level. Reboot the system. Start YOU again to install patches that have been published after the release of SP4. Update by using zen- updater. Start zen- updater from the system tray. Apply updates with 'package management' flag ('slesp. Apply all maintenance updates that are available up to this.
This may also. install a new kernel (a subsequent reboot is recommended). Select the 'move- to- sles. If add- on products are installed, migration patches for these will be selected automatically. Select "Refresh" from the zen- updater context menu might be necessary.
After that, the patches 'slesp. Apply these patches to upgrade the system. SP4 level. Reboot the system. Install patches that have been published after the release of SP4.
Update by using rug. Open a root shell. It is recommended to quit zen- updater. Do not only close it's window! If unsure, run 'killall zen- updater'.
Run 'rug up - t patch'. This will update the software maintenance stack. Run 'rug ping - a' to ensure that zmd is responsive again. Run 'rug up - t patch' again to apply all maintenance updates provided for SP3 before starting the migration.
Run 'rug ping - a'. Run 'rug in - t patch move- to- sles. Run 'rug ping - a'. Run 'rug up - t patch' to upgrade the system to SP4 level. Run 'rug ping - a' in order to wait for ZMD to become responsive again. Run 'rug up - t patch' again. This will install post- SP4 updates.
Reboot the system. The following script can be used as a base for a complete unattended update from SP3 to SP4: #!/bin/bashset - x# update the package management stack first: rug in - y - t patch slesp. SP3: rug up - y - -agree- to- third- party- licences - t patch < < EOFn. EOFsleep 2. 40 & & rug ping - a# install the move- to- sles. For SLED use move- to- sled.
SP4 level: rug up - y - -agree- to- third- party- licences - t patch < < EOFn. EOFsleep 2. 40 & & rug ping - a# install post- SP4 updates: rug up - y - -agree- to- third- party- licences - t patch < < EOFn # For an automatic reboot after the migration, you may change 'n' to 'y'EOFTechnical background.
As a general technical background, these are the steps involved. Ya. ST online update, zen- updater, or rug. The packagemanagement software itself is updated first (patch slesp. The patch to enable migration to SP4 needs to be applied explicitly. This patch is called 'move- to- sles. It is an optional patch and therefore it is not preselected.
The patch installs the SP4- migration product marker (it can be. A log of the operation of this patch is kept as /var/log/Ya. ST2/move- to- sles.
Furtheron 'suse_register' is called to add the SLES1. SP4- Online or SLED1. SP4- Online. catalog. Additionally for SLED, third- party vendor catalogs (ATI.
NVIDIA, ..) are updated. If Su. SE Linux add- on products are installed. SDK), the rescpective catalogs are updated as well. At this point, the installation source may need to be adapted if.
The online tools now offer three patches to move the system to SP4: 'slesp. SP4 level.'product- sles. SLED respectively) replaces the SP4- migration product marker with the SP4 product marker. It furtheron calls 'suse_register' again to unsubscribe the SLES1. SP3- Online or SLED1. SP3- Online catalog and to add the SLES1. SP4- Update or SLED1.
SP4- Update catalog. A log of the operation of this patch is stored as /var/log/Ya. ST2/product- sles. As a result, there are now three catalogs listed: The SLE 1.
SP3 installation source. The SLES1. 0- SP4- Online/SLED1. SP4- Online catalog, which contains the software which was necessary to perform the actual update to SP4.
The SLES1. 0- SP4- Updates/SLED1. SP4- Updates catalog, which contains software updates published after the release of SP4. Both, the SLE 1. 0 SP3 catalog and the SP4- Online catalog now act as the. In order to simplify the setup you can substitute certain catalogs by the SLES1. SP4- Pool/SLED1. 0- SP4- Pool catalog. SP4- Pool is a rpm- md repository containing all packages from.
SP4 media (It does not contain the patches for migration). By. default, the catalog is returned as unsubscribed and not added to Ya. ST. Please have a look at TID 7. Which software catalogs to mirror with Subscription Management Tool which.
Update to SP4 via patches by using Subscription Management Tool for SUSE Linux Enterprise. As an alternative to downloading the updates for each single. Novell update server, it is possible to use. Subscription Management Tool for SUSE Linux Enterprise to mirror the. This tool acts as Novell Customer. Center proxy both for client registrations and as software update. The Novell Appnote Keep your SUSE Linux Desktops, Servers and OES Servers Updated with Subscription Management Tool for SUSE Linux Enterprise gives an overview of its features as well as instructions on how to implement it.
Update via using an SP4 installation media. Please obtain the ISO images from https: //download. Update by booting from a SLES/SLED 1. SP4 media. To start the standard update from CD- ROM or DVD, reboot your. CD- ROM or DVD drive. Perform a system.
To achive this, select"Installation" - > Select the language - > Agree to the License - > Select "Update" instead of "New Installation". Providing the SP4 media as a network installation.
It is also possible to provide the installation media via. Because SLE 1. 0 Service Pack 4 is a complete product it can be. Installation Server in the same way as every other SUSE. LINUX Enterprise Product. The procedure on how to setup an installation server and to add. Installation Notes for.
SUSE Linux Enterprise Server/Desktop 1. SP3. You will find. README file on the first DVD. For SLES see. chapter "3. Setting Up an Installation Server" of this document. For SLED, see chapter 6. README. You will find a more detailled guide in the documentation of.
SLES9/SLES1. 0 GA version. For SLES1. 0 have a look at chapter. Setting Up an Installation Server Using Ya. ST" in the file. sles- admin. CD/DVD in the. directory /docu/en.
This document is also available online under https: //www. For SLES9 you find this chapter in the file. To start the update, go ahead as follows: You need a bootable medium to initialize the process. Booting via. network/PXE is also possible. For ready- to- apply configuration examples. PXE boot, see chapter 4. SLES1. 0 documentation.
Boot the machine and choose "Installation".